-
Operating
Voltage: 10-30V D.C. (Lowest voltage may depend
on number and colour of LEDs used)
-
P.C.B.
Dimensions 137mm x 74mm x ~33mm
-
Atmel
AT90S2313 Flash Micro-controller based module
(20 pin DIP)
-
7
Segment drivers can sink over 100mA per pin (with
constant current regulation)
-
Standard
outputs: 3 off 7 segment plus decimal point displays
(can be customized to your specs)
-
Multiple
modules can be used to make larger numeric display
-
7
DIP switches to set address or other parameters
(128 addresses)
-
Built
in 2.5A switch mode power supply for anode supply.
Output voltage is adjustable to match the requirements
of the displays being used (up to 15V).
-
RS485
driver built in or RS232 with interface module
-
Standard
Atmel 6 pin programming connector to program Flash
memory for development
